STIHL 2-MIX ENGINE:
HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX
engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine
is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as
fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.
MANUAL FUEL PUMP:
FOR FEWER STARTING STROKES. The manual fuel pump reduces
the number of strokes required to start the tool, making the start-up process quicker and easier This is
particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting.
This will ensure that there is enough petrol in the carburettor when starting.
STIHL ERGOSTART:
EFFORTLESS STARTING. STIHL ErgoStart saves you energy when
starting your tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the
starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An
additional spring between the crankshaft and the starter cord roll makes this easier.
LOCKING THROTTLE TRIGGER WITH STOP BUTTON:
COMFORTABLE ADJUSTMENT OF
BLOWING FORCE. The throttle trigger can be used to adjust the engine performance and as such the usable blowing
force. You can adjust the engine output between idling and full power on an infinitely variable basis. The throttle
trigger always remains in your preferred position. A brief thumb press on the stop button is sufficient to switch
off the tool. The blower remains immediately ready to be used again.
INFINITELY VARIABLE LOCKING CONTROL SWITCH:
FOR COMFORTABLE HANDLING. The
control switch can be locked in any preferred position between idling and full power. This is helpful for longer
periods of use. It is easy and convenient to adjust, as your hand always stays on the ergonomically shaped handle.